|
|
|
HOME > PRODUCTS > ITQ SERIES |
|
|
|
|
- Suitable for on-off small ball/plug vavles and damper automation
- By combination of spur gears, provide vvery high efficiency
- The motor is a specially designed induction motor that produces high
starting torques and thermally protected from overheating.
- Manual Operation by Spanner and dial position indication
- Very compact and light weight & High Duty Cycle |
|
|
|
|
General Specifications |
Enclosure |
IP66, O-ring Sealed |
Power Supply |
110,220VAC/1Ph/50,60Hz, 24VDC |
Control Power |
110,220VAC/1Ph/50,60Hz |
Duty Cycle (ON-OFF) |
S2: 30 min |
Motor |
Induction Motor |
Limit Switches |
2 ea for Open & Close (5A, 250VAC) |
Auxiliary Limit Switches |
2 ea for Open & Close (5A, 250VAC) |
Travel Angle |
90 ¨¬ ¡¾ 5 % |
Position Indication |
Continuous mechanical indicator with arrow |
Manual Override |
Extruded shaft on bottom |
Terminal Block |
Spring loaded push type |
Cable Entries |
2-PG13.5 with the plastic Cable Gland |
Space Heater |
5W (110/220VAC) for anti-condensing |
Ambient Temperature |
-20 ~ + 70 ¡É |
Ambient Humidity |
90% |
Technical Specification |
Model |
ITQ0040 |
Rated Torque (Nm) |
40Nm (4kg.m) |
Duty Cycle S2 |
S2: 30 minutes |
Operating Time (Second) 50Hz |
14 seconds |
Operating Time (Second) 60Hz |
12 seconds |
Female Shaft Size (mm) |
14X14mm Double Square |
Motor Insulation Class |
E |
Rated Current (Amp.)
50 Hz / 60 Hz |
110 Volt |
0.16 A |
220 Volt |
0.18 A |
24VDC |
0.8 A |
No. of Handwheel |
7.5 |
ISO 5211 Mounting Flange |
ISO F03/05/07 Flange |
Weight ( Kg ) |
3 kgs |
|
|
|
|
|
|